BPSMF - WTI W-2 WATER HARD

Product Identification

Product ID:WTI W-2 WATER HARD
MSDS Date:11/01/1989
FSC:3439
NIIN:00F025658
MSDS Number: BPSMF

Responsible Party
WELD TECH INTERNATIONAL INC
10200 CHESTER ROAD
CINCINNATI, OH 45215
US

Emergency Phone: 772-5005

Info Phone: 772-5005

Cage: WELDT

Contractor
WELD TECH INTERNATIONAL INC
CINCINNATI, OH 45215 US

Telephone: 772-5005

Cage: WELDT

Ingredients

CARBON, GRAPHITE

CAS: 7440-44-0

RTECS: FF5250100

Fraction By Weight: 1.05%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293


AMORPHOUS FUSED SILICA, SILICON DIOXIDE, QUARTZ, SILICON

CAS: 60676-86-0

RTECS: VV7328000

Fraction By Weight: 0.2%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


MANGANESE, MN COMPOUNDS

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: 0.25%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293


VANADIUM

CAS: 1314-62-1

RTECS: YW1355000

Fraction By Weight: 0.2%

OSHA PEL C,0.5 MG/M3

ACGIH TLV: 0.05 MG/M3RDUST;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


RED IRON OXIDE/IRON (III) OXIDE/FERRIC OXIDE/YELLOW FERRIC

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: BALANCE

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: DRYNESS/IRRITATION OF
THROAT, DISCOMFORT, DIZZINESS & NAUSEA. EYES: INJURY. SKIN: BURNS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:MAY CONTRIBUTE TO PULMONARY IRRITATION OR
PNEUMOCONIOSIS.
Medical Cond Aggravated by Exposure:IMPAIRED PULMONARY FUNCTIONS OR
ILLNESS.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED
GIVE ARTIFICIAL RESPIRATION. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:NONFLAMMABLE
Unusual Fire/Explosion Hazard:WELDING ARC, OPEN FLAMES, & SPARK CAN
IGNITE COMBUSTIBLE.

Handling

Handling and Storage Precautions:AVOID HUMIDITY & SHOCKS. ELECTRIC
SHOCK FROM ARC WELDING EQUIPMENT CAN KILL.
Other Precautions:WELDING ELECTRODES & WIRES ARE NONHAZARDOUS SOLIDS AT
AMBIENT TEMPERATURE. ACTUAL EXPOSURE SHOULD BE DETERMINED BY
MONITORING THE FUME IN THE OPERATORS BREATHING ZONE. READ &
UNDERSTAND MFG'S INSTRUCT ION & PRECAUTION LABEL ON PRODUCT.

Exposure Controls

Respiratory Protection:USE ENOUGH VENTILATION TO KEEP THE FUMES & GASES
BELOW TLV'S IN THE WORKER'S BREATHING ZONE & GENERAL AREA.
Ventilation:LOCAL EXHAUST, MECHANICAL (GENERAL): REQUIRED
Protective Gloves:WELDERS PROTECTIVE
Eye Protection:COLOR ABSORPTIVE GLASSES
Other Protective Equipment:WELDING HELMET & PROTECTIVE CLOTHING,
LEATHER APRON.
Supplemental Safety and Health

Chemical Properties

Appearance and Odor:SOLID WIRE OR ROD. RODS ARE COATED W/FLUX FOR
WELDING PROCESS.

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HUMIDTY
Hazardous Decomposition Products:WELDING FUMES BUILT DURING WELDING
PROCESS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.